Kinetic Art Shredder Chassis (Assmebled, No Frame)
Fully assembled shredder frame chassis.
Choose the iconic Banksy "Girl w/Balloon" image or submit a portrait/artwork. The recommended custom image size is 864 x 1152 @ 72 DPI or greater.
Two copies of your chosen image will be printed onto high-quality canvas. One will be made into a belt and mounted on rollers. The second will be made into a pre-shredded copy and concealed within the frame. When activated, the pre-shredded copy is cleverly lowered from the bottom. At the same time, the image on the canvas belt smoothly scrolls down and out of view, resulting in a compelling and super cool illusion!
The mechanism is constructed from thick PCB (Printed Circuit Board) material with its integrated circuitry exposed on one side. Mount behind any 12" x 16" picture frame with the included Z-clips and hardware.
Included:
- PCB chassis with integrated electronics
- Main image printed on a high-quality canvas belt
- Pre-shredded image copy printed on a canvas sheet
- IR remote control
- 12V wall adapter with 8ft cord
The included IR remote controls the following standard functions:
- Main shred/un-shred sequence: Experience the thrill as the artwork is shredded right before your eyes. The illusion is maintained for five seconds, then reverses, magically reassembling itself back into its original "un-shredded" image.
- Toggle States: Effortlessly switch between the shredded and un-shredded states, allowing you to enjoy both perspectives for as long as you wish. The piece will remain in the desired state indefinitely until you choose otherwise.
- Alarm Mute: Enable or disable the beeping alarm feature that sounds during the shredding action.
- Trim Up & Down: Fine-tune the positioning of the artwork within the frame.
- Reset home position: If needed, you can recalibrate the starting home position.
The unit will arrive fully assembled and ready to be mounted to any 12" x 16" frame. Mounting hardware included. The fully completed piece can be hung from a wire attached to the back of your frame.
Disclosure: All submitted artwork must be accompanied by a waiver releasing MagnetarLabs and Etsy from any potential IP infringement.
Fully assembled shredder frame chassis.
Choose the iconic Banksy "Girl w/Balloon" image or submit a portrait/artwork. The recommended custom image size is 864 x 1152 @ 72 DPI or greater.
Two copies of your chosen image will be printed onto high-quality canvas. One will be made into a belt and mounted on rollers. The second will be made into a pre-shredded copy and concealed within the frame. When activated, the pre-shredded copy is cleverly lowered from the bottom. At the same time, the image on the canvas belt smoothly scrolls down and out of view, resulting in a compelling and super cool illusion!
The mechanism is constructed from thick PCB (Printed Circuit Board) material with its integrated circuitry exposed on one side. Mount behind any 12" x 16" picture frame with the included Z-clips and hardware.
Included:
- PCB chassis with integrated electronics
- Main image printed on a high-quality canvas belt
- Pre-shredded image copy printed on a canvas sheet
- IR remote control
- 12V wall adapter with 8ft cord
The included IR remote controls the following standard functions:
- Main shred/un-shred sequence: Experience the thrill as the artwork is shredded right before your eyes. The illusion is maintained for five seconds, then reverses, magically reassembling itself back into its original "un-shredded" image.
- Toggle States: Effortlessly switch between the shredded and un-shredded states, allowing you to enjoy both perspectives for as long as you wish. The piece will remain in the desired state indefinitely until you choose otherwise.
- Alarm Mute: Enable or disable the beeping alarm feature that sounds during the shredding action.
- Trim Up & Down: Fine-tune the positioning of the artwork within the frame.
- Reset home position: If needed, you can recalibrate the starting home position.
The unit will arrive fully assembled and ready to be mounted to any 12" x 16" frame. Mounting hardware included. The fully completed piece can be hung from a wire attached to the back of your frame.
Disclosure: All submitted artwork must be accompanied by a waiver releasing MagnetarLabs and Etsy from any potential IP infringement.
Fully assembled shredder frame chassis.
Choose the iconic Banksy "Girl w/Balloon" image or submit a portrait/artwork. The recommended custom image size is 864 x 1152 @ 72 DPI or greater.
Two copies of your chosen image will be printed onto high-quality canvas. One will be made into a belt and mounted on rollers. The second will be made into a pre-shredded copy and concealed within the frame. When activated, the pre-shredded copy is cleverly lowered from the bottom. At the same time, the image on the canvas belt smoothly scrolls down and out of view, resulting in a compelling and super cool illusion!
The mechanism is constructed from thick PCB (Printed Circuit Board) material with its integrated circuitry exposed on one side. Mount behind any 12" x 16" picture frame with the included Z-clips and hardware.
Included:
- PCB chassis with integrated electronics
- Main image printed on a high-quality canvas belt
- Pre-shredded image copy printed on a canvas sheet
- IR remote control
- 12V wall adapter with 8ft cord
The included IR remote controls the following standard functions:
- Main shred/un-shred sequence: Experience the thrill as the artwork is shredded right before your eyes. The illusion is maintained for five seconds, then reverses, magically reassembling itself back into its original "un-shredded" image.
- Toggle States: Effortlessly switch between the shredded and un-shredded states, allowing you to enjoy both perspectives for as long as you wish. The piece will remain in the desired state indefinitely until you choose otherwise.
- Alarm Mute: Enable or disable the beeping alarm feature that sounds during the shredding action.
- Trim Up & Down: Fine-tune the positioning of the artwork within the frame.
- Reset home position: If needed, you can recalibrate the starting home position.
The unit will arrive fully assembled and ready to be mounted to any 12" x 16" frame. Mounting hardware included. The fully completed piece can be hung from a wire attached to the back of your frame.
Disclosure: All submitted artwork must be accompanied by a waiver releasing MagnetarLabs and Etsy from any potential IP infringement.